OIM exhibits adsorbents series at Hannover Messe 2026
Time:2026-04-30
The 2026 Hannover Messe in Germany came to a successful conclusion from 20th ~ 24th April. At this global industrial technology event, Jiangxi OIM Chemical Co., Ltd. with its core adsorbent products - molecular sieves, activated alumina, ceramic balls, and professional and pragmatic technical service attitude, successfully attracted professional buyers from Europe, the Middle East, Southeast Asia and other regions to stop and negotiate on the ordinary standard booth of only 9m2, achieving a wonderful appearance of "small booth, high efficiency".
The products exhibited by OIM Chemical this time cover multiple industrial gas separation and purification fields such as petrochemicals, air separation, natural gas dehydration, pressure swing adsorption hydrogen production (PSA), and waste gas treatment.
· Molecular sieve series (3A, 4A, 5A, 13X and carbon molecular sieve): With a uniform microporous structure, it can accurately adsorb molecules such as H2O, CO2, methanol, hydrogen sulfide, etc., and perform stably in cryogenic air separation pre purification, natural gas purification, PSA and other scenarios.
· Activated alumina series: With a large specific surface area, high compressive strength, and low wear, it is widely used in processes such as compressed air drying, hydrogen peroxide recycling, and fluorine-containing wastewater treatment.
· Inert Ceramic Ball Series: As a support media for the reactor bed, it is resistant to acid and alkali, high temperature, and can effectively protect the catalyst and improve fluid distribution, with a long service life.
Although the booth area is only 9m2 and there is no large demonstration equipment. At the same time, it was also affected by the union strike on the 1st and 2nd day, and transportation was inconvenient. However, our team arranged the limited booth in an orderly manner: product sample bottles were neatly arranged, hot selling thin product catalogs and all product parameter catalogs were classified and placed, and the background wall briefly displayed the typical application scenario parameter table of the product. On the 3rd day, many passing visitors were attracted by the samples and clear classification guidelines, and took the initiative to stop.
“ What is the water absorption rate and regeneration temperature range of your 3A molecular sieve? Do you have any actual case data of petrochemical drying towers? ” A technical manager from an Italian gas engineering company asked very specifically. Our sales manager immediately opened the product specification file and project application case table on the phone, answered them one by one, and submitted the corresponding sample bottles and technical data sheet. Customer carefully examined the luster and uniformity of the molecular sieve particles, inquired about the packing density and crushing force values, satisfactorily took away the manual and contact information, and stated that they would organize the operating parameters and communicate via email.
 |
 |
This is a clip from the interaction on the 3rd day of the fair. Due to the simplicity and openness of the booth, it has actually brought us closer to the customers. Without exaggerated sound and light, customers can naturally take samples, flip through information, and ask for details. During the exhibition, our team received professional visitors from 18 countries and regions, including Germany, Italy, Saudi Arabia, Türkiye, Brazil, India and Indonesia, including:
· The procurement supervisor of a local molecular sieve custom filling enterprise in Germany compares the particle size distribution of the on-site control samples;
· A purchasing representative from a Spain company was looking for tower packing products and happened to see ceramic ball samples. They inquired about the temperature resistance level and the possibility of using them as packing layers for power plant desulfurization towers.
· A process engineering from a natural gas processing plant in Saudi Arabia inquired about the resistance of molecular sieve 13X to hydrothermal aging under high acidic gas reservoir conditions;
· The technical director of a PSA oxygen production equipment manufacturer in India checked the adsorption capacity and pressure drop curve of activated alumina item by item with his project's raw gas composition record book.
 |
 |
 |
 |
Although there is no on-site signing or confirmation of requirements, professional product knowledge can still attract professional attention. In the future, our company will continue to focus on the research and production of adsorption products such as molecular sieves, activated alumina, and ceramic balls. With more precise exhibition strategies and solid product strength, we will provide professional technical services and seek for the next opportunity to exhibitions go abroad.
The 2026 Hannover Messe in Germany came to a successful conclusion from 20th ~ 24th April. At this global industrial technology event, Jiangxi OIM Chemical Co., Ltd. with its core adsorbent products - molecular sieves, activated alumina, ceramic balls, and professional and pragmatic technical service attitude, successfully attracted professional buyers from Europe, the Middle East, Southeast Asia and other regions to stop and negotiate on the ordinary standard booth of only 9m2, achieving a wonderful appearance of "small booth, high efficiency".
The products exhibited by OIM Chemical this time cover multiple industrial gas separation and purification fields such as petrochemicals, air separation, natural gas dehydration, pressure swing adsorption hydrogen production (PSA), and waste gas treatment.
· Molecular sieve series (3A, 4A, 5A, 13X and carbon molecular sieve): With a uniform microporous structure, it can accurately adsorb molecules such as H2O, CO2, methanol, hydrogen sulfide, etc., and perform stably in cryogenic air separation pre purification, natural gas purification, PSA and other scenarios.
· Activated alumina series: With a large specific surface area, high compressive strength, and low wear, it is widely used in processes such as compressed air drying, hydrogen peroxide recycling, and fluorine-containing wastewater treatment.
· Inert Ceramic Ball Series: As a support media for the reactor bed, it is resistant to acid and alkali, high temperature, and can effectively protect the catalyst and improve fluid distribution, with a long service life.
Although the booth area is only 9m2 and there is no large demonstration equipment. At the same time, it was also affected by the union strike on the 1st and 2nd day, and transportation was inconvenient. However, our team arranged the limited booth in an orderly manner: product sample bottles were neatly arranged, hot selling thin product catalogs and all product parameter catalogs were classified and placed, and the background wall briefly displayed the typical application scenario parameter table of the product. On the 3rd day, many passing visitors were attracted by the samples and clear classification guidelines, and took the initiative to stop.
“ What is the water absorption rate and regeneration temperature range of your 3A molecular sieve? Do you have any actual case data of petrochemical drying towers? ” A technical manager from an Italian gas engineering company asked very specifically. Our sales manager immediately opened the product specification file and project application case table on the phone, answered them one by one, and submitted the corresponding sample bottles and technical data sheet. Customer carefully examined the luster and uniformity of the molecular sieve particles, inquired about the packing density and crushing force values, satisfactorily took away the manual and contact information, and stated that they would organize the operating parameters and communicate via email.
|
|
This is a clip from the interaction on the 3rd day of the fair. Due to the simplicity and openness of the booth, it has actually brought us closer to the customers. Without exaggerated sound and light, customers can naturally take samples, flip through information, and ask for details. During the exhibition, our team received professional visitors from 18 countries and regions, including Germany, Italy, Saudi Arabia, Türkiye, Brazil, India and Indonesia, including:
· The procurement supervisor of a local molecular sieve custom filling enterprise in Germany compares the particle size distribution of the on-site control samples;
· A purchasing representative from a Spain company was looking for tower packing products and happened to see ceramic ball samples. They inquired about the temperature resistance level and the possibility of using them as packing layers for power plant desulfurization towers.
· A process engineering from a natural gas processing plant in Saudi Arabia inquired about the resistance of molecular sieve 13X to hydrothermal aging under high acidic gas reservoir conditions;
· The technical director of a PSA oxygen production equipment manufacturer in India checked the adsorption capacity and pressure drop curve of activated alumina item by item with his project's raw gas composition record book.
|
|
|
|
Although there is no on-site signing or confirmation of requirements, professional product knowledge can still attract professional attention. In the future, our company will continue to focus on the research and production of adsorption products such as molecular sieves, activated alumina, and ceramic balls. With more precise exhibition strategies and solid product strength, we will provide professional technical services and seek for the next opportunity to exhibitions go abroad.
